Toshiba Qosmio X500 - Manual (Page 117)

User’s Manual 4-38
Operating Basics
CD/DVD/BD
1. Store your CD/DVD/BD in the container they came in to protect them
and keep them clean.
2. Do not bend the CD/DVD/BD.
3. Do not write on, apply a sticker to, or otherwise mar the surface of the
CD/DVD/BD that contains data.
4. Hold the CD/DVD/BD by its outside edge or the edge on the centre
hole. Fingerprints on the surface can prevent the drive from properly
reading data.
5. Do not expose your CD/DVD/BD to direct sunlight, extreme heat or
cold. Do not place heavy objects on your CD/DVD/BD.
6. If your CD/DVD/BD become dusty or dirty, wipe them with a clean dry
cloth. Wipe from the centre out, not in a circular direction around the
CD/DVD/BD. If necessary, use a cloth dampened in water or a neutral
cleaner. Do not use benzine, thinner or similar cleaners.
Wireless communications
The computer’s wireless communication function supports both Wireless
LAN and Bluetooth devices.
■ Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a
microwave oven or in areas subject to radio interference or magnetic
fields. Interference from a microwave oven or other source can disrupt
Wi-Fi or Bluetooth operation.
■ Turn Wi-Fi and Bluetooth functionalities off when near a person who
may have a cardiac pacemaker implant or other medical electric
device. Radio waves may affect pacemaker or medical device
operation, possibly resulting in serious injury. Follow the instruction of
your medical device when using any Wi-Fi or Bluetooth functionality.
■ Always turn off Wi-Fi or Bluetooth functionality if the computer is near
automatic control equipment or appliances such as automatic doors or
fire detectors. Radio waves can cause malfunction of such equipment,
possibly resulting in serious injury.
■ It may not be possible to make a network connection to a specified
network name using the ad hoc network function.
If this occurs, the new network(*) will have to be configured for all
computers connected to the same network in order to re-enable
network connections.
* Please be sure to use the new network name.