Toshiba BDX5300 - Manual (Page 19)

19
English
• [Power Down Mode]
Quick Start can reduce the time of Power
On or Power Off significantly. But the
power consumption is higher in Quick Start
mode.
Setting methods:
Setup Menu -> General Setting ->System-
>Power Down Mode -> Normal/Quick Start
(Default as Normal).
Choose Quick Start to go into Quick Start
mode. This mode will only be activated
upon your next standby Off/On.
Generally, in Normal mode, Power On or
Power Off takes longer time and its
standby power consumption is low. In
Quick Start mode, Power On or Power Off
takes shorter time and its standby power
consumption is higher.
Notes:
-Please be noted that the responding time to
the video output varies for different TV,
therefore the responding time to power on the
TV in Quick Start mode may vary.
-The player will reset to Normal mode
whenever the AC power recovers from a loss.
[Language]
Set up the OSD(On-Screen Display), Menu,
Audio and Subtitle default language for the
player.
System OSD English
English
English
English
Language Menu
Playback Audio
Security Subtitle
Network
General Setting
SETUP Exit
Move cursor key to select menu option
then use “OK ” key to select
• [OSD]
Select the default on-screen display
language.
• [Menu]
Select the default menu language.
• [Audio]
Select the default audio language.
• [Subtitle]
Select the default subtitle language.
[Playback]
System
PBC
On
On
On
On
On
Language
Playback
Security
Angle Mark
PIP Mark
Secondary Audio...
Last Memory
Network
General Setting
SETUP Exit
Move cursor key to select menu option
then use “OK ” key to select
• [Angle Mark]
Some Blu-ray TM discs/DVDs contain the
scenes recorded with multiple angles,
which allow you to enjoy the videos with
your desired angles, therefore the angle
mark is displayed only when the Blu-ray
Disc™/DVD disc is supportable for multi-
angle and Angle Mark is set to ON.
{On} – Display the angle mark.
{Off} – Hide the angle mark.
• [PIP Mark]
The Picture -In- Picture (PIP) mode display
two pictures on the TV screen at the same
time, the full screen picture is called Main
Window and the small inset window is
called Sub Window. The PIP mark is
displayed when in PIP mode and PIP Mark
is set to ON.
{On} – Display the PIP mark.
{Off} – Hide the PIP mark.
Note:
- High Definition PIP (Second Video) is not
supported.
• [Secondary Audio Mark]
{On} – Display Secondary Audio Mark.
{Off} – Hide the Secondary Audio Mark.
• [Last Memory]
If you open the disc tray or switch this
Blu-ray Disc™ player to standby state
during normal playback, the Blu-ray Disc™
player can memorize the end playing point,
the player will start playback from the
memorized point next time.
{On} – Active Last Memory feature.
{Off} – Disable Last Memory feature.
Note:
- Not all the Blu-ray TM discs can support this
function.
• [PBC]
VCD2.0 has PBC control (Playback Control)
menu, which allow you to interact with the
system via menu.
{On} – Display playback control menu, use
NUMBER keys to select desired option.
{Off} – Hide playback control menu and
start playback from track1 automatically.
• [Closed Caption]
Allow people who are deaf or hearing
impaired, to have access to television
programming by displaying the audio
portion of a television programme as text on
the screen.
{On} – Display the Closed Caption.
{Off} – Hide the Closed Caption.