Section 2 getting started, Loading the battery, Inserting and removing an sd card (optional) – Toshiba Camileo S10 User Manual

Page 10: Getting started

Advertising
background image

8

Section 2

Getting Started

Loading the Battery

Before using the camcorder, users must load lithium-ion rechargeable Battery.

Follow the arrow a direction and slide to eject the battery

1.

cover.
insert the battery following to the correct polarity marks

2.

( + or -).
Close the battery cover firmly.

3.
4. lift the battery from location B.

Inserting and Removing an SD Card (Optional)

The camcorder comes with internal memory which allows you to store pictures and movies. You can
expand the memory capacity by using an optional SD memory card. To insert a memory card, refer to
the figure as below:

insert the memory card into the right position.

1.

To remove an installed SD card, press the card inwards to

2.

release it.
When the card pops out, gently remove it from its slot.

3.

Recommended memory capacity: 1GB or above.

4.

Note

When a memory card is fitted, movies/pictures are saved on card rather than on the built-in

memory.
Protecting Data on an SD Card:

SD card is read-only

by locking the SD card. No pictures and movies can be
recorded when the SD card is locked. Make sure the lock is
on writeable position before recording any media.

B

A

Writeable

position

Write-Protected

Position

Advertising