Toshiba RDXV49 - Manual (Page 23)

23 EN
In
tr
od
uct
ion
Con
n
ec
ti
on
s
Basi
c Se
tu
p /
TV
Vi
ew
Op
eration
P
lay
b
a
ck
E
d
it
in
g
O
th
e
rs
Fu
nct
ion
S
e
tu
p
Re
co
rd
in
g
V
H
S
Fu
nc
ti
on
s
5
Press [ENTER
\OK] to exit.
• After auto tuning is completed, the lowest memorised
DVB channels appears on the screen.
• You can use [PROG. G \ H] to change the DVB
channels.
Note
• If you press [RETURN] or [SETUP] during the scanning,
auto tuning will be cancelled.
You can preset a DVB channel manually and individually.
1
Follow steps 1 to 3 in “Auto Tuning (DVB)” on
page 22.
2
Select “Manual Tuning” using [K
\ L], then
press [ENTER \OK].
3
Select your desired position number using
[K
\ L], then press [ENTER\OK].
• The tuner will begin to search up or down automatically.
When a DVB channel is found, the unit will stop
searching.
• When “Auto” is selected, the unit will search for the
channels which have not been stored in channels
memory.
4
Press [SETUP] to activate the setting.
This unit has “Service Update” function which searches and
stores newly available digital channels automatically at 8:00. If
a new channel is found, a message will appear on the screen
when you turn on the DVB channel at first time after storing a
new channel. Press any button to clear the message.
You can set the country for receiving your local channels
properly.
1
In stop mode, press [SETUP]. Select “General
Setting” using [K
\ L], then press [ENTER\OK].
2
Select “Channel” using [K
\ L], then press
[ENTER \OK].
3
Select “Country” using [K
\ L], then press
[ENTER \OK].
4
Select your desired country using [K
\ L], then
press [ENTER \OK].
5
Press [SETUP] to exit.
TV View Operation
The following operations are available while viewing TV
channels through this unit’s tuner.
To switch DVB, analogue and external input (AV1/AV2/
DV(AV3)) mode.
Press [INPUT SELECT
F] repeatedly to select DVB,
analogue or external input mode.
The mode changes as follows:
You can select external input mode (AV1/AV2/DV(AV3)) by
pressing [PROG.
G \ H] repeatedly.
The mode changes as follows:
You can select a channel using [PROG. G \ H] or directly
enter the channel using [the Number buttons].
Notes on using [the Number buttons]:
• For one or two-digit number channels, the channels will be
identified for 2 seconds after you press the channel number.
You can only select channels 1~899 (Digital) or
1~99 (Analogue).
If you cannot get a “Station Name” of Analogue channel, it is
not indicated with a channel number.
You can switch between TV audio modes by pressing
[AUDIO
D]. Each mode is indicated on the TV screen.
Audio mode during reception of analogue bilingual
broadcasts:
• If the programme does not have more than one sound track,
[AUDIO D] is not effective.
Manual Tuning (DVB)
DVB
Service Update
DVB
Country Setting
DVB ANALOG
Channel Auto
Country
France
Spain - Peninsula
Spain - Canary Islands
Germany
Italy
Switzerland
Select a Channel
DVB ANALOG
Selecting the Audio Mode
ANALOG
Mode Audio output
Display on the
TV screen
Main Main audio from both speakers Main
Sub Sub audio from both speakers Sub
Main / Sub
• Main audio from the left speaker
• Sub audio from the right speaker
Main/Sub
DVB mode Analogue mode External input mode
AV1 AV2 DV(AV3)
External input mode (with [PROG. G \ H] buttons)
E3TK0FD_EN.book Page 23 Monday, March 9, 2009 10:00 AM