Picture recording, Using flash or digital light function, Using zoom function – Toshiba Camileo X100 User Manual
Page 16
![background image](/manuals/488889/16/background.png)
16
EN
Picture Recording
In Picture Record Mode (The
•
Picture Mode LED Indicator
lights up), press OK Button halfway
down until the focusing frame turns from white to green. Then, press it fully down to take a picture.
Press Playback Button to view the picture.
•
Three resolution settings are available:
•
Image Quality
High Quality:16 Mega Pixels
Standard Quality:10 Mega Pixels
Low Quality:3 Mega Pixels
Using Flash or Digital Light Function
This camcorder has three flash settings and one setting to allow you to extend the brightness of the
•
objects that are dark or in the shadow. Using Left Button to change the settings.
Flash Auto (
1.
): The flash fires automatically according to light conditions. Use this mode for
general photography. (Picture Recording Only)
Red Eye
2.
Reduction(
): The pre-flash will fire to reduce the red-eye effect. (Picture Recording
Only)
Digital Light
3.
(
): To extend the dynamic range for backlight and high contrast sense so that
the objects will be brighter and clearer.
Flash Off (
4.
): The flash will not fire under any circumstances. Use this mode when taking
images in a place where flash photography is prohibited, or when the subject is distant (beyond
the range of the flash). (Picture Recording Only)
Note
The flash will be disabled automatically when the battery power is low (
).
Using Zoom Function
The zoom magnifies images when recording movies or taking pictures.
•
To zoom in/out, press the Tele/Wide Button.
1.
It can be set from 1X~100X (10X Optical zoom and 10X Digital zoom).
2.