Toshiba Satellite M100 (PSMA1) - Manual (Page 93)

User’s Manual 5-3
The Keyboard
Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key.
Hotkeys
Fn + ESC Volume Mute: Turns the volume on and off.
Fn + F1 Instant Security: Enters screen saver mode and
blanks the screen. To restore your desktop, press
any key or use the TouchPad.
Fn + F2 Power Save Modes: Displays the power save
modes and lets you change the power settings
Fn + F3 Standby: This hot key switches the system to
Standby mode.
Fn + F4 Hibernate: This hot key switches the system to
Hibernate mode.
Fn + F5 Display Selection: Changes displays.
Default resolution for simultaneous mode is set to WXGA (2048 × 1536).
If you connect an RGB (Monitor) that is not WXGA resolution, change it in
"Display Properties".
Fn + F6 Brightness Down
Fn + F7 Brightness Up
Fn + F8 Wireless Device Controls: Pressing this hot key
allows you to switch between active wireless
devices if the wireless communication switch is
switched on.
Fn + F9 TouchPad On/Off
Fn + F10 Cursor Keypad On/Off: This hot key enables/
disables the embedded cursor keypad. See
Chapter 3, Getting Started , for more information.
Fn + F11 Numeric Keypad On/Off: This hot key enables/
disables the embedded numeric keypad. See
Chapter 3, Getting Started , for more information.
Fn + F12 Scroll Lock On/Off
Fn + Space Change Resolution: Cycles sequentially from
the current resolution to 800 × 600 to 2048 × 1536
and back again to the original resolution.