Toshiba Camileo S20 - Manual (Page 22)

22
EN
Picture Effect
Operation Display Screen
In Picture Record Mode, press OK Button to 1.
show the wheel menu.
Use Up/Down Buttons to select [Effect]. The
2.
submenu of Effect pops up.
Press Right Button to enter the submenu.
3.
Use Up/Down Buttons to select the desired 4.
option, and then press Right Button to enter its
option screen.
The Picture Effect submenu contains 2 options
5.
-- Self-Timer and ISO-- for you to adjust the
camcorder’s setting.
Self-Timer
The self-timer allows you to take pictures with a ten-second time delay. The self-timer light on the front
of the camcorder will also blink. The speed of blinking will increase just before the picture is taken.
Operation Display Screen
In the Effect submenu, use Up/Down Button to 1.
select [Self-Timer]. Then press Right Buttton to
enter its option screen.
Use Up/Down Buttons to select the desired
2.
option.
Press OK Button to validate the setting.
3.
ISO
The camcorder adjusts the ISO sensitivity of its images automatically. Two manual ISO sensitivity
settings are available. (800/1600) The larger the number is, the higher the ISO sensitivity is set to.
Select a small number to shoot a smoother image. Select a large number to shoot an image in a dark
location or to shoot a subject moving at high speed.
Operation Display Screen
In the Effect submenu, use Up/Down Button to 1.
select [ISO]. Then press Right Buttton to enter
its option screen.
Use Up/Down Buttons to select the desired
2.
option.
Press OK Button to validate the setting.
3.
Note
The image may become noisy when the ISO number is large.