Toshiba Qosmio F10 - Manual (Page 115)

User’s Manual 7-2
HW Setup
Display
This tab lets you customize your computer’s display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you use the display to be used when the computer is booted.
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer. Select from the
following settings:
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
Auto-Selected Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD (Default).
LCD + Analog RGB Selects both the internal LCD and external
monitor for simultaneous display.
HDD
−> FDD −>
CD-ROM
−> LAN
The computer looks for bootable files in the
following order: HDD, floppy disk drive, CD-ROM
and LAN. (Default)
FDD
−> HDD −>
CD-ROM
−> LAN
The computer looks for bootable files in the
following order: floppy disk drive, HDD, CD-ROM
and LAN.
HDD
−> CD-ROM −>
LAN
−> FDD
The computer looks for bootable files in the
following order: HDD, CD-ROM, LAN and floppy
disk drive.
FDD
−> CD-ROM −>
LAN
−> HDD
The computer looks for bootable files in the
following order: floppy disk drive, CD-ROM, LAN
and HDD.
CD-ROM
−> LAN −>
HDD
−> FDD
The computer looks for bootable files in the
following order: CD-ROM, LAN, HDD, floppy disk
drive.
CD-ROM
−> LAN −>
FDD
−> HDD
The computer looks for bootable files in the
following order: CD-ROM, LAN, floppy disk drive
and HDD.