To disconnect a usb hdd – Toshiba ZL2 User Manual
Page 61
61
CONTROLS AND FEATURES
Engl
ish
Setting USB HDD Energy-Saving Mode
a
In the Recording Setup screen, press
B
or
b
to select
Recording Devices and press OK.
b
Press
B
or
b
to select Device Energy Saving Mode.
c
Press
C
or
c
to select Normal or Energy Saving.
NOTE:
• When set to Energy Saving, it may take a while for the USB
HDD to function.
• When set to Energy Saving, depending on the type of USB
HDD, the USB HDD indicator lamp may not indicate standby
status even when in standby status.
To change the name of the USB HDD
a
In the Recording Setup screen, press
B
or
b
to select
Recording Devices and press OK.
b
Press
B
or
b
to select Device List and press OK. The
Device List screen will appear.
c
Press the GREEN button.
Edit the desired name by using the software keyboard
(page 51). The maximum number of characters is 10.
NOTE: If multiple USB HDD appear on the Device List screen
in Step 2, press
B
or
b
to select the USB HDD whose name
you want to change.
To perform a USB HDD operation test
a
Press the YELLOW button on the Device List screen.
USB HDD operation test will start.
Wait until the test ends.
NOTE: The results of the device test are only a guide.
The device may not function as shown in the results.
To register a USB HDD
a
Press OK on the Device List screen.
Press
C
or
c
to select Yes in the confirmation window
that will appear and press OK. USB HDD registration
will start. Wait until registration ends.
NOTE:
• If multiple USB HDD appear on the Device List screen, press
B
or
b
to select the USB HDD you want to register.
• If a USB HDD is re-registered, it will not be formatted.
To format a USB HDD
a
Press the BLUE button on the Device List screen.
Press
C
or
c
to select Yes in the confirmation window
that will appear and press OK. Formatting will start.
Wait until formatting ends.
NOTE:
• If multiple USB HDD appear on the Device List screen, press
B
or
b
to select the USB HDD you want to format.
• When the USB HDD is formatted, all the data stored on the
USB HDD will be deleted.
a
Press MENU /
C
c
to highlight Setup icon.
b
Press
B
/
C
c
to highlight Preferences icon and
press OK.
c
Press
B
or
b
to select Recording Setup and press
OK.
d
Press
B
or
b
to select Recording Devices and press
OK. The Device List screen will appear.
e
Press the RED button.
Press
C
or
c
to select Yes in the confirmation window
that will appear and press OK. The Connected check
mark will be removed. Disconnect the USB HDD.
NOTE: If multiple USB HDD appear on the Device List screen,
press
B
or
b
to select the USB HDD you want to disconnect.
Recording Devices
Normal
Device List
Device Energy Saving Mode
Device List
USB HDD 1
Device Name
Connected
Registered
To disconnect a USB HDD
Device List
USB HDD 1
Device Name
Connected
Registered