Disposing of pc and pc batteries, Disposing of pc and pc batteries -18, Video playback – Toshiba Qosmio G20 (PQG21) User Manual

Page 188

Advertising
background image

10-18

User’s Manual

Troubleshooting

Video Playback

Disposing of PC and PC batteries

Discard this PC in accordance with ordinances or rules of local

regulations. For further information, contact your local government.

This PC contains rechargeable batteries. After repeated use, the

batteries will finally lose their ability to hold a charge and you will need

to replace them. Under certain applicable laws and regulation, it may be

illegal to dispose of old batteries by placing them in the trash.

Please be kind to our shared environment. Check with your local

government authority for details regarding where to recycle old batteries

or how to dispose of them properly. This product contains mercury.

Disposal of this material may be regulated due to environmental

considerations. For disposal, reuse or recycling information, please

contact your local government.

If your hard disk or other storage media contains sensitive data, you

should be aware that standard deletion procedures do not remove data

from the media. These standard deletion procedures include:

Selecting Delete for a target file

Putting files in the Recycle Bin and emptying the Recycle Bin

Reformatting the media

Reinstalling the operating system from the Product Recovery

DVD-ROM

Problem

Procedure

DVD does not play

smoothly when using

the Windows Media

Center Edition of the

DVD playing software

Try setting the configuration in the BIOS setup.

However, note that when the BIOS setup

configuration is modified, the power saving

function of PCI Express becomes disabled. Refer

to Chapter 7,

HW Setup

for more information.

Set the PCI Express Link ASPM in the BIOS

setup using the following steps:
1. Press the F1 key. The BIOS setup screen will

appear.

2. Set the PCI Express Link ASPM to “Disabled”

in BATTERY.

3. Press the End key. A confirmation message

will appear.

4. Press the Y key. The BIOS setup will

terminate and the computer will reboot.

If problems persist, contact your dealer.

Advertising