Toshiba Magnia Z500 User Manual
Page 15
Trap transmitting to a Compaq Insight Manager function
If a fault occurs in server, it is possible to transmit a SNMP trap to a Compaq Insight
Manager. A SNMP trap is transmitted when the fault about temperature, FAN and Voltage
in server. In order to confirm this function, it is necessary to specify by the Local
Configuration Tool.
(Appendix 4 Local Configuration Tool)
Auto-shutdown function (ASD function)
This function enables automatic execution of the sequence from shutting down the
Operating System through to turning OFF the power by operating the power/sleep button
of the server.
The supported machine model for an Agent: MAGNIA Z300/Z310/Z500
Please refer to User’s Guide of server (on this”Server Setup TooL and Documentation CD).
Collect Logs function
It is the function to collect the files (log files and files of information data) for knowing a
state, the contents of an alert, and so on of the Agent machine. When the specified file
exists, those files can be transmitted to a Management Console from the Agent machine.
Enterprise Associated function
When some faults occur in the server, faults can be informed to each of the managers of
Compaq Insight Manager (XE), OpenView and Tivoli.
(Appendix 8 Enterprise Association)
Remote Console function
It is the function to operate the Agent machine from a Management Console. Mainly,
when a keyboard, a mouse and a monitor are not connected to the Agent machine, this
function uses.
The supported machine model for an Agent: MAGNIA Z500
(Appendix 6 Remote Console Function Setting)
HDD Connector Board Log function
It is the function to maintain the log recorded in a HDD Connector Board.
A HDD Connector Board is a board for connecting an IDE HDD. This function is
unnecessary, when an IDE HDD is not connected to the server, or when the server is
equipped with an IO device chassis.
The supported machine model for an Agent: MAGNIA Z500
5