Toshiba AT10-A - Manual (Page 79)

This section only applies to models with 3G modules.
Inserting a Micro SIM card
This section explains how to insert a Micro SIM card.
Do not carry out the following operations when the tablet is powered on,
otherwise the Micro SIM card may be damaged.
1. Turn the Micro SIM card so that the contacts (metal areas) are facing
down.
2. Remove the slot cover and insert the Micro SIM card into the Micro
SIM card slot on the tablet and push it until you hear a click.
Figure 7-2 Inserting a Micro SIM card
1
2
1. Micro SIM card slot 2. Micro SIM card
Now you can power on your tablet to use your provider’s mobile networks.
Please always keep a minimum of 1.5cm distance away from the antennas
area during operation.
Removing a Micro SIM card
To remove a Micro SIM card, follow the steps as detailed below:
Do not carry out the following operations when the tablet is powered on,
otherwise the Micro SIM card may be damaged.
1. Remove the slot cover and push the Micro SIM card until you hear a
click to partially release it.
2. Grasp it and pull it out of the slot.
USB device
This tablet is equipped with a Micro USB port supporting USB host
function. This allows you to connect the following USB devices to the
User's Manual 7-4