Bios setup program, Bios setup program -7, Starting and ending the bios setup program – Toshiba Qosmio G40 User Manual

Page 139: Section i

Advertising
background image

User’s Manual

7-7

Qosmio G40

Button Setting

Start Up Logo

This option lets you select from the following two types of logos which is
displayed at computer start up.

Sound Logo

Use this option to enable or disable sound to sound, when a personal
computer is started.

BIOS Setup Program

This section explains items and procedures other than those setup using
the HW Setup program.

Starting and Ending the BIOS Setup Program

Animation

The Logo appears as an animated image
(Default).

Picture

The Logo appears as a static image.

Enabled

Enables sound to sound (Default).

Disabled

Disables sound to sound.

Notes Before Using the BIOS Setup Application

In most cases, changes to the system’s configuration should be made
within Windows by using applications such as
TOSHIBA HW Setup,
TOSHIBA Password Utility, Windows Device Manager and so forth.
If you make changes to the configuration through the BIOS setup
program, please be aware that the configuration set through the
Windows applications will take priority.

Changes to the settings within the BIOS setup program will not be
erased even if the power supply is turned off and the main battery
removed. However, if the built-in Real Time Clock (RTC) battery runs
out of power, most of the settings will revert back to their default values.
However, please note that the following items will not be affected in this
instance:
• Password
• Hard Disk Drive Password
• Fingerprint patterns

Advertising