Scarlett SC-1053 - Manual (Page 3)

www.scarlett-europe.com SC-1053 3
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
· Please read this instruction manual carefully before
use and keep in a safe place for future reference.
· Incorrect operation and improper handling can lead to
malfunction of the appliance and injuries to the user.
· Before the first connecting of the appliance check that
voltage indicated on the rating label corresponds to the
mains voltage in your home.
· For home use only. Do not use for industrial purposes.
Do not use the appliance for any other purposes than
described in this instruction manual.
· Do not use outdoors.
· Always unplug the appliance from the power supply
before cleaning and when not in use.
· To prevent risk of electric shock and fire, do not
immerse the appliance in water or in any other liquids.
If it was happened DO NOT TOUCH the appliance,
unplug it immediately and check in service center.
· Do not take this product into a bathroom or use near
water.
· Do not place appliance or parts near an open flame,
cooking or other heating appliances.
· Close supervision is necessary when it is used near
children.
· Do not leave the appliance switched on when not in
use.
· Do not operate after malfunction or cord damage.
· Do not attempt to repair, adjust or replace parts in the
appliance. Check and repair the malfunctioning
appliance in the nearest service center only.
· Keep the cord away from sharp edges and hot
surfaces.
· Do not pull, twist, or wrap the power cord around
appliance.
· Never insert fingers, pencils or any other object
thorough the guard when the fan heater is operating.
· To reduce the risks of electric shock do not switch the
appliance by wet hands.
· For repair or accessories, contact an authorized
service center only.
· Operating unit should be not closer than 0.9 m to
flammable or easy deformable under high temperature
objects.
· When the fan heater is on, move it away from the wall
socket and make sure that the cord is not in front of the
air outlet grill. Do not install the unit closer than 0.3 m
to any objects (wall mounting requires free space >0,5
m to a ceiling).
· If, however, the airflow is inadvertently obstructed
during use, the built-in thermal safety cutout will
automatically switch off the appliance.
CAUTION:
· Do not cover the appliance when it is in use.
· Do not use a fan heater in rooms less than 4 m 2 area.
OPERATION
· Insert the plug to the power supply.
· The appliance should make the BEEP sound and the
display should show the air temperatute in the room.
· Press MODE button to select the working mode of the
fan heater
Press one time to set the first speed (the display
should show 2 points)
Press 2 times to set the second speed (the
display should show 4 points)
· When the speed is chosen, press SET button to set
the time and the desired air temperature:
press SET one time
use + and buttons to set the period of working
(the interval is 0.5-7.5 hours); the appliance will
stop when the time is over (you can leave the
indication of the display unchagned 0:0 to
keep the appliance working continuously)
press SET for the second time
use the + and buttons to set the desired
temperature in interval 15 ° -45° (you can leave
the indication of the display unchaged - 20 ° -
to set the fan mode of the appliance working)
press SET to confirm the settings
the display will show chosen temperature and
time in turns
· Press MODE to turn off the appliance
ATTENTION:
· Should the unit overheat, provided safety device will
switch it off automatically. In such case switch the
appliance off and unplug. Check all vents and try to
restart again after at least 5 minutes. If it does not
operate, contact a Service center.
NOTES:
· The room must be closed, if not, using of fan
heater will not make good result because of heat
leakage.
CARE AND CLEANING
· The fan heater should be cleaned regularly, otherwise
the efficiency of heating may be reduced.
· Always unplug the fan heater and allow it to cool down
before cleaning.
· Wipe the outer surface of appliance with a soft damp
cloth.
· From time to time clean the inside of the fan heater
with vacuum cleaner, operating at low setting.
· Do not use abrasive cleaners, gasoline, thinner or
other chemicals to clean the fan heater.
STORAGE
· Complete all requirements of chapter CARE AND
CLEANING
· It is recommended to keep the original box for after
season storage.
· Keep the appliance in a cool, dry place.