Nokia BH-503 - Manual (Page 7)

G e t s t a r t e d
7
■ Charge the battery
The headset has an internal, nonremovable, rechargeable battery. Do
not attempt to remove the battery from the headset, as you may
damage the headset.
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the charger connector. The indicator
light is red while charging. It may take a while before charging starts.
If charging does not start, disconnect the charger, plug it in again,
and retry.
Charging the battery fully may take up to 1 hour and 15 minutes.
3. When the battery is fully charged, the indicator light turns green.
Disconnect the charger from the headset and the wall outlet.
The fully charged battery has power for up to 13 hours of talk time, up to
10 days of standby time, or up to 13 hours of music playing time (or 75
minutes of music playing time with 20 minutes charging). However, the
times may vary with different compatible Bluetooth devices, usage
settings, usage styles, and environments.
When battery power is low, the headset beeps at regular intervals, and
the indicator light slowly flashes red. Recharge the battery.
■ Switch the headset on or off
Switch on
To switch on, press and hold the multifunction key for about 2 seconds.
The headset beeps, and the green indicator light is briefly displayed.
When the headset tries to connect to the paired mobile phone or music
player that you have last used with it, the indicator light slowly flashes
green. When the headset is connected to a paired device and is ready for
use, the indicator light slowly flashes blue. If the headset has not been
paired with a device, it automatically enters the pairing mode (see “Pair
and connect the headset,” p. 8).
If you connect the headset to a device but do not use it for a while,
switch off the headset to save power.