BellSouth MH9915 - Manual (Page 31)

Caller ID System Operation
5. When the desired setting is displayed, press and hold the /re/pa button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the button to return to
STANDBY mode.
NOTE: The standard and default flash time setting is 600 msec. This is the setting
you should use to access standard telephone services such as call waiting. This
setting is adjustable to allow for PBX and other special uses.
H. Changing the Pause Time
1. Press and hold the button to enter the menu.
2. Press the button to go to the PAUSE TIME programming option.
3. Press the button to change the setting. “4” will begin flashing.
4. Press the SCROLL UP or DOWN button to select the desired time delay.
5. When the desired setting is displayed, press and hold the /re/pa button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the button to return to
STANDBY mode.
I. Programming One-Touch Voice Mail Dialing
1. Press and hold the button to enter the menu.
2. Press the button to go to the VOICE MAIL programming option.
3. Press the button to enter the voice mail speed dial number.
4. Press the TELEPHONE KEYPAD to buttons to enter the phone number
used to access your voice mail messages (up to 15 digits).
5. When the desired setting is displayed, press and hold the /re/pa button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the button to return to
STANDBY mode.
1
oper
0
24
voice mail/menu
voice mail/menu
voice mail/menu
voice mail/menu
voice mail/menu
save
save
save
flash/edit
tuv 8
wxy 9
flash/edit