Belkin F8V9017 - Manual (Page 14)

Operation (continued)
• Slide the open end of the ear hook onto the ear from the front. It will tend to lock in
position with a slight twisting motion.
• The ear hook is malleable for further slight adjustment.
Switching On
1. Press the main button until a short tone is heard in the earpiece.
2. Release the button. The Headset will generate the switch-on melody in the earpiece.
3. The LED will flash the signal to indicate the Headset is now in STANDBY mode ready
to be paired, or if already paired, ready to make or receive a call.
Switching Off
1. Press the main button until a short tone is heard in the earpiece.
2. Release the button. The Headset will generate the switch-off melody.
3. The LED will stop flashing.
13