Bush Hog TOUGH TD-1500 User Manual
Bush hog, Tough, Tri-deck flex finishing mowers
Bush Hog
®
TOUGH
Tri-Deck Flex Finishing
Mowers
BUsH HOG
®
TOUGH FeaTUres
TOUGH Fabricated 7 Gauge Decks
TOUGH Commercial Grade spindles
TOUGH 5 Year Gearbox Limited Warranty
TOUGH Kevlar reinforced Belts
TOUGH 4x4 Inch Boxed Wing section Lift arms
TOUGH Powder Coat Paint
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Page 9
Model 1100
Model 1500
MODeLs
TD-1100
TD-1500
TD-1700
Cutting Width
11 ft
15 ft
17 ft
Cutting Height
3/4
to 4
1/4
inches
1
1/2
to 4
1/2
inches
1
1/2
to 4
1/2
inches
Transport Width
6 ft 6 inches
8 ft
8 ft
Transport Height
6 ft 3 inches
8 ft
9 ft
Transport Length
12 ft
14 ft
14 ft
Minimum Tractor HP*
30 PTO
40 PTO
40 PTO
Type Hitch
Pull Type, Clevis Hitch, Three-Position Adjustment
Gearbox
45 HP center wings/80 HP transfer box for all 3 models
Tractor PTO speed
540 RPM
540 RPM
540 RPM
Driveline size
Category 4 80° CV (Main) - Category 3 (Decks)
Wing section Lift arms
4 x 4 inch Boxed Section
4 x 4 inch Boxed Section
4 x 4 inch Boxed Section
Wing Flex
30° Up & 10° Down
30° Up & 10° Down
30° Up & 10° Down
Wing Deck Flex
10° Side to Side, 10° Front to Rear - Independent of the Wing Frame
Tire size
23 x 9.5 (2)
23 x 8.5 (2)
23 x 8.5 (2)
Deck Widths
(3) 4 ft
(1) 6 ft and (2) 5 ft
(3) 6 ft
Deck Plate
7 gauge
7 gauge
7 gauge
Blade Tip speed
18,468 FPM
18,271 FPM (18,231 Wings)
18,271 FPM
Gauge Wheels
10 x 4 inches
13 x 5 inches
13 x 5 inches
Belt
(1) per Deck “B” size Kevlar
(1) per Deck “B” size Kevlar
(1) per Deck “B” size Kevlar
Belt adjustment
Spring Loaded Idler
Spring Loaded Idler
Spring Loaded Idler
Deck Overlap
6 inches
6 inches
6 inches
Blade Overlap
1
1/2
inches
1
1/2
inches
1
1/2
inches
Front roller size (Standard)
3 x 5 inches
3 x 5 inches
3 x 5 inches
approximate Weight
2450 lbs
2752 lbs
2855 lbs
Options (TD-1100 only)
Underside roller kit for each deck, double acting hydraulic cylinder conversion kit
Warranty
1 year limited warranty with a 5 year gearbox limited warranty
FeaTUres
• Rear discharge • High blade tip speeds
*
Minimum horsepower will be subject to change due to mowing conditions