Blaupunkt ESSEN MP36 - Manual (Page 8)

34
Note:
● To protect your hearing, the pow-
er-on volume is limited to a value
of “38”. If the volume level was
higher than this when the device
was last switched off and the
“LAST VOL” setting is activated,
the system will reset the volume to
“38” when you switch the device
on again.
When you have finished adjusting the
setting,
➮
press the MENU button
8 twice.
Quick volume reduction (mute)
You can quickly decrease the volume
(mute) to a level preset by you.
➮
Briefly press button 1.
“MUTE” appears in the display.
Cancelling mute
To return to your previously set volume
level,
➮
briefly press button 1 again.
Setting the mute level
You can adjust the mute level.
➮
Press the MENU button 8.
➮
Press the or button 7 re-
peatedly until “MUTE LVL” ap-
pears in the display.
➮
Adjust the mute level using the
buttons
7.
When you have finished adjusting the
setting,
➮
press the MENU button 8 twice.
ADJUSTING THE VOLUME
Switching the confirmation
beep on/off
The system will play a confirmation
beep for some functions if you keep a
button pressed down for longer than
two seconds, for instance, when you
assign a radio station to a station but-
ton. You can switch the beep on/off.
➮
Press the MENU button 8.
➮
Press the or button 7 re-
peatedly until “BEEP ON” or
“BEEP OFF” appears in the dis-
play.
➮
Adjust the beep setting using the
buttons 7. “OFF” means the
beep is switched off and “ON”
means the beep is switched on.
When you have finished adjusting the
setting,
➮
press the MENU button 8.
Mute while telephoning
If your device is connected to a mobile
telephone, the car radio’s volume will
be muted as soon as you “pick up” the
telephone. This requires that the mo-
bile telephone be connected to the de-
vice as described in the installation in-
structions.
“PHONE” appears in the display.
02EssenMP36 gb 17.02.2006, 14:13 Uhr 34