Brother HL-3040CN - Manual (Page 6)

6
5
Print a test page
a
Make sure that the printer power switch is off.
b
Connect the AC power cord to the printer.
c
Plug the AC power cord into an AC power
outlet. Turn on the printer power switch.
d
After the printer has finished warming up, the
LCD will show Ready.
e
Press Go. The printer prints a test page. Check
that the test page has printed correctly.
6
Set your language on the
control panel
a
Press + or - to choose General Setup.
Press OK.
General Setup
b
Press OK again.
Local Language
c
Press + or - to choose your language.
Press OK to accept.
English
d
Press Cancel to exit from Menu.
Now go to
Go to the next page to install the printer driver.
IMPORTANT
DO NOT connect the interface cable yet.
Note
This function will not be available after the first
print job you send from your computer.