Buffalo Technology LT-H90 - Manual (Page 6)

6
Connect your cables:
The LinkTheater must be connected to a TV or monitor. Although
the LinkTheater plays mp3s and other popular music formats, a
TV or monitor is required to navigate and configure options on
the LinkTheater.
There are many ways to connect the audio and video output of
the LinkTheater to a TV or home theater. The following directions
describe connecting your LinkTheater to your TV or monitor
with the standard yellow analog composite video connector,
which almost any TV will have. This cable is included in your
LinkTheater package and will work with most TVs.
Here’s a simple way to connect your LinkTheater directly to a TV:
1 - Hook up the included analog video cable to your TV or
monitor. Most TVs will have the connections color-coded: Yellow
for video, red for right-audio, and white for left-audio.
 - Connect the other end of the analog video cable to the
associated ports on the LinkTheater. The ports are also color
coded: red for right audio, white for left audio, and yellow for
video.
3 - Connect the CAT-5 Ethernet cable into the Ethernet port on
the back of the LinkTheater and connect the other end to a router,
hub, or switch on your network.