Bush Hog TH4200 User Manual
Page 71
Tie-Down Bracket
Negative (Black) Cable Positive (Red) Cable
69
Battery Installation
1.
Set the battery in its holder.
2.
Install the battery tie-down bracket and tighten the nuts.
3.
First connect the positive (red) cable.
4.
Second connect the negative (black) cable.
5.
Verify that cables are properly routed.
NOTE: When installing a new battery, make sure it is fully charged
prior to its use. Using a new battery that has not been fully charged
can damage the battery and result in a shorter life. It can also hinder
vehicle performance.
Battery Storage
When the vehicle is placed in storage for three months or more, the
battery should be removed, stored out of the sun in a cool, dry place
and tested monthly. Before reusing, take the battery to your dealer for
testing and recharging.