Sharp MX-M623U - Manual (Page 15)

13
PART NAMES AND FUNCTIONS
EXTERIOR
(1) Saddle stitch finisher (MX-FN16) *
Output device that enables the use of the staple
function and offset function.
Finisher (MX-FN15)
*
Output device that enables use of the staple
function, offset function and pamphlet copy function.
Finisher (3 trays) (MX-FN14)
*
Output device that enables use of the staple function
for up to 100 sheets (8-1/2" x 11" size paper).
(2) Punch module (AR-PN4A, AR-PN4C, AR-PN4D,) *
Punches holes in copies and other output.
Requires finisher (MX-FN15) or saddle stitch
finisher (MX-FN16).
Punch module (MX-PN10A, MX-PN10C, MX-PN10D,)
Punches holes in copies and other output.
Requires finisher (3 trays) (MX-FN14).
(3) Inserter (MX-CF10) *
Paper set in an inserter can be inserted into
output as covers or inserts. The inserter can be
used to staple output and punch holes manually.
(4) Automatic document feeder
This automatically feeds and scans multiple sheet
originals. Both sides of two-sided originals can be
scanned at once.
(5) Front cover
Open to replace toner cartridge.
(6) Operation panel
This is used to select functions and enter the
number of copies.
(7) Keyboard *
This is a keyboard that is incorporated into the
machine. When not used, it can be stored under
the operation panel.
(8) USB connector (A type)
Supports USB 2.0 (Hi-Speed).
This is used to connect a USB device such as
USB memory to the machine.
For the USB cable, use a shielded cable.
(9) Centre tray
Finished sheets are deposited here.
(10) Bypass tray
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
(11) Tray 5 (when A4 large capacity tray is
installed) (MX-LC10)*
This holds paper.
(12) Tray 5 (when A3 large capacity tray is
installed) (MX-LCX3N)*
This holds paper.
(13) Tray 1-Tray 2
The trays hold paper. Approximately 800 sheets of
standard A4 or 8-1/2" x 11" size paper (80 g/m
2 (20
lbs.)) can be loaded in tray 1, and approximately
1200 sheets of standard A4 or 8-1/2" x 11" size
paper (80 g/m
2 (20 lbs.)) can be loaded in tray 2.
(14) Tray 3
Tray 3 holds paper. Approximately 500 sheets of
standard (80 g/m
2 (20 lbs.)) paper can be loaded
in this tray. Tabbed paper and transparencies can
also be loaded.
(15) Tray 4
Tray 4 holds paper. Approximately 500 sheets of
standard (80 g/m
2 (20 lbs.)) paper can be loaded
in this tray.
* Peripheral device. For more information, see "PERIPHERAL DEVICES" in "1. BEFORE USING THE MACHINE" in the
Operation Guide.
(12) (13) (14) (15)
(10)
(9)
(8)
(1) (2) (3) (4) (5) (7) (6)
(11)