Maintenance, Replacing a toner cartridge removing misfeeds – Sharp MX-M365N User Manual

Page 17

Advertising
background image

17

• Do not dispose of used toner cartridges. Place them in a plastic bag and keep them. The technician will collect the used toner cartridges when performing maintenance.
• To view the approximate amount of toner remaining, continually touch the [Home Screen] key during printing or when the machine is idle. The percentage of toner remaining will

appear in the display while the key is touched.

• Depending on your conditions of use, the image may become faint or the image blurred.

MAINTENANCE

When toner is running low, the message "Toner Low (Do not replace cartridge until requested)" appears.
When this message appears, prepare a toner cartridge for replacement.
When the amount of toner decreases further, the message "Ready to scan for copy. (Change the toner
cartridge.)" appears. When this message appears, replace the toner cartridge.
When the toner runs out, printing is stopped and the message "Change the toner cartridge." appears.

When a paper misfeed occurs, the message “A misfeed has occurred.” will appear in the touch
panel and printing and scanning will stop.
In this event, touch the [Check how to remove misfeeds] key in the touch panel.
When the key is touched, instructions for removing the misfeed will appear. Follow the
instructions. When the misfeed is cleared, the message will automatically clear.

• Do not throw toner cartridges into a fire.

Toner may fly and cause burns.

• Store toner cartridges out of the reach of

small children.

• Store the toner in a location that is cooler

than 40°C (104°F). Storage in a hot location
may cause the toner in the cartridge to
solidify.

• Always store toner cartridges on their sides.

If toner cartridges are stored on end, the
toner may harden and become unusable.

• Please use SHARP-recommended toner

cartridges. If toner cartridges other than
SHARP-recommended toner cartridges are
used, the machine may not attain full quality
and performance and there is a risk of
damage to the machine.

• The fusing unit and the output unit are hot.
• Take care not to touch the fusing unit when

removing a misfeed.

• There is a risk of burning.

Replacing a toner cartridge

Removing misfeeds

Caution

Caution

Old toner cartridge

Shake 5 or 6 times Gently insert straight into the machine

until it locks

Open

New toner cartridge

Gently pull straight
out with both
hands

1

2

3

4

5

Close

6

Advertising
This manual is related to the following products: