Sharp LC-60UD20KN - Manual (Page 85)

83
Environmental specifications
Item 60 o 70 o
I On-mode (W) (in home-mode) 173 W 184 W
J Energy-Save-Mode (W) Advanced 125 W 134 W
K Standby-Mode (W) 0.18 W 0.18 W
L Annual Energy Consumption (kWh) 240 kWh 255 kWh
L
Annual Energy Consumption
Energy-Save-Mode (kWh)
Advanced 173 kWh 186 kWh
5 Energy Classification B A
I Measured according to EN 62087:2009
J For further information about the Energy Save function, please see related pages in
this operation manual
K Measured according to EN 50564:2011
Standby power consumption applies when the TV is set to not receive EPG data
L Annual energy consumption is calculated according to EU Regulation (EU)
No 1062/2010 based on operating 4 hours per day for 365 days a year
NOTE
• The power consumption of on-mode varies depending on the images the TV displays.
Mounting the TV on a wall
• This TV should be mounted on a wall only with a SHARP wall mount bracket.
The use of other wall mount brackets may result in an unstable installation and may
cause serious injuries.
The listed optional accessory is available for this LCD colour TV. Please purchase them at your
nearest shop.
• Mounting the LCD colour TV requires special skills and should only be performed
by qualified service personnel. Customers should not attempt to do the work
themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
• You can ask qualified service personnel about using an optional bracket to mount the
TV to a wall.
• When you mount the TV on a wall, you should attach the supporting post.
NOTE
• Detach the cable tie on the rear of the TV when using the optional mount bracket.
• Due to the terminal configuration on this TV, when you wall-mount this model, make
sure there is enough space between the wall and the TV for the cables.
• To use this TV mounted on a wall, remove the AC cord holder and the covers at the 4
locations on the rear of the TV, and then use the screws supplied with the wall mount
bracket to secure the bracket to the rear of the TV.
E Wall mount audio setup
When you mount the TV on a wall, you can adjust the sound to a more suitable
one by setting this function to “Yes”.
Go to “TV Menu” > “Setup” > “View setting” > “Wall mount audio setup”.
Appendix
No. Part name
Part
number
Notes
1 Wall mount bracket AN-52AG4
The mark “c” indicates the location of
the centre of the TV screen
.