Sharp EL-9900 - Manual (Page 220)

210
Chapter 13: Programming Features
E SETUP menu P E
SETUP menu commands are used to set the various settings
used in graphing and calculations.
01 Rect Rect
Sets the graph coordinates as X and Y coordinates.
02 Param Param
Sets the graph coordinates as parametric coordinates.
03 Polar Polar
Sets the graph coordinates as polar coordinates.
04 Web Web
Sets the graph coordinates as axes in sequence graphs.
u(n – 1) is set to the X axis and u(n) is set to the Y axis.
05 Time Time
Sets the graph coordinates as axes in sequence graphs.
n is set to the X axis and u(n), v(n) and w(n) is set to the Y axis.
06 uv uv
Sets the graph coordinates as the axes of sequence graphs.
u(n) is set to the X axis and v(n) is set to the Y axis.
07 uw uw
Sets the graph coordinates as the axes of sequence graphs.
u(n) is set to the X axis and w(n) is set to the Y axis.
08 vw vw
Sets the graph coordinates as the axes of sequence graphs.
v(n) is set to the X axis and w(n) is set to the Y axis.
09 Deg Deg
10 Rad Rad
11 Grad Grad
Sets the angle mode to degree, radian and gradient, respectively.