Sharp GS-XP12FGR - GU-X12FGR - Manual (Page 18)

MAINTENANCE
MAINTENANCE AFTER AIR
CONDITIONER SEASON
1 Operate the unit in the COOL
mode, temperature setting 32°C,
for about half a day to allow the
mechanism to thoroughly dry.
2 Stop the operation and unplug
the unit. Turn off the circuit
breaker, if you have one exclu-
sively for the air conditioner.
3 Clean the filters, then reinstall
them.
MAINTENANCE BEFORE
AIR CONDITIONER SEASON
1 Make sure that the air filters are
not dirty.
2 Make sure that nothing obstructs
the air inlet or outlet.
3 Check the outdoor mounting rack
periodically for wear and to make
sure it is firmly in place.
E-16
MAIN UNIT OPERATION
Use this operation when the remote control is not available.
TO TURN ON
Press the POWER button on the unit.
• The red OPERATION lamp ( ) on the unit
will light and the unit will start operating in
the AUTO mode.
• The fan speed and temperature setting are
set to AUTO.
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp ( ) on the unit
will turn off.