Belkin WIRELESS N+ ROUTER N450 - Manual (Page 12)

10
Self-Healing
Self-Healing Wireless Radio
Self-Healing alerts you if your wireless radio hardware (aka
Wi-Fi) is turned off. If you’re using a laptop computer, you
will want to make sure the wireless card is turned on so it can
receive a signal from the Router. To turn on your wireless radio,
look for a physical or software switch on your computer.
Typically, one of these three icons is shown next to the switch:
Due to the many variations in appearance of this switch,
please consult your computer’s manual for additional
help. If your wireless Internet radio hardware is turned on
but is still not connecting to the Internet, Self-Healing will
automatically start a routine to reestablish the connection.