Black Box 120H User Manual
Page 11
12
LINE SHARE 120H
3.3 Placing the Line Share 120H
The Line Share 120H can be placed on either a flat surface, or mounted
on a wall. To mount the Line Share on a wall, follow these steps:
1. Mark the positions for 2 mounting screws (not supplied) on the wall. The
positions should be 3-1/4” apart (vertically). Drill the 2 holes, then thread
the screws into the wall. The screws should extend 3/16”. Do not over-
tighten the screws.
2. Align the keyholes on the back of the Line Share with the 2 screws, then
push in and press down to secure it to the wall.
NOTE
If you place the Line Share 120H on a flat surface, do not place it close to
any peripheral equipment. Keep it approximately 2 to 3 feet (60 to 90 cm)
away from all electronic equipment.
The Line Share 120H can be mounted on the wall with the connected
telephone line cords above or below the unit.
Figure 3-2. Bottom of the Line Share 120H.