BIXOLON BCD-1100 - Manual (Page 13)

Rev. 1.00 - 13 -
BCD-1100
7. USB Virtual COM Installation
PC requires software installation when it detects new hardware connected to USB Port.
First, connect BDC-1100DU/WU (USB) to PC USB Port and install software and set
the conditions as below.
1) Connect BDC-1100DU/WU (USB) to PC USB Port. Message will pop up Found New
Hardware.
2) Select Install from a list or specific location (Advanced).
3) Select the location VirtualCOM￦2K&XP by Browse and select Next.