B&C Speakers Coaxials 15CXN76 - Manual (Page 2)

2
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
3 2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance. Loudspeaker in free air.
4 Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
5 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
6 2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance. Loudspeaker in free air.
7
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
8 12 dB/oct. or higher slope high-pass filter.