BT 6170 - Manual (Page 6)

BT Prelude 20 Headset – Edition 2 – 14.06.04 – 6170
Before using your BT Prelude Headset, you must ‘pair’ it to a Bluetooth phone or other
compatible device.
1. Make sure your BT Prelude headset battery is fully charged.
2. Make sure your headset is switched off.
3. Press and hold the button until the light flashes green and red alternately (after about
6 seconds). Your headset is now in pairing mode and will remain so for 1 minute.
4. If pairing with a BT Prelude phone:
The BT Prelude phone is always in Bluetooth reception mode. The phone’s screen should
list the BT Prelude 20 Headset as
TECOM BT3061 .
Pairing
8888888888888888
20 03 09 : 22
6
6170 BT Prelude 20 UG [2] 14/6/04 4:07 pm Page 6