Best K8087 - Manual (Page 6)

- 6 -
CLAMP
TABS
MAINTENANCE
Proper maintenance of the Range Hood will
assure proper performance of the unit.
Grease Filters
Grease filters should be cleaned when the
light switch flashes or remains lif when the
blower is off (i.e. 30 hours of operation). Use
a warm detergent solution to clean filters.
Filters are dishwasher safe. See page 13 for
filter removal and installation instructions.
Non-ducted Recirculation Filter
The non-ducted recirculation filter should
be changed when the light switch flashes or
remains lif when the blower is off (i.e. 120
hours of operation). See page 13 for filter
removal and installation instructions.
Hood Cleaning
Stainless steel is one of the easiest materials
to keep clean. Occasional care will help pre-
serve its fine appearance.
Cleaning tips:
● Hot water with soap or detergent is all that
is usually needed.
● Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth to
avoid water marks.
●
For discolorations or deposits that persist, use a non-scratching household cleanser
or stainless steel polishing powder with a little water and a soft cloth.
● For stubborn cases, use a plastic scouring pad or soft bristle brush together with
cleaser and water. Rub lightly in direction of polishing lines or "grain" of the
stainless finish. Avoid using too much pressure which may mar the surface.
●
DO NOT allow deposits to remain for long periods of time.
●
DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere
to the surface causing rust.
● DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to
remain in contact with stainless steel for extended periods. Many of these com-
pounds contain chemicals which may be harmful. Rinse with water after expo-
sure and wipe dry with a clean cloth.
Painted surfaces should be cleaned with warm water and mild detergent only.
GREASE
FILTERS
NON-DUCTED
RECIRCULATION
FILTER