Belkin F5D7330 - Manual

F5D7330 Setup Guide
Infrastructure
Connect the device to a computers network card. Crossover or patch cables both work.
If the user wants to connect wirelessly to a router without any encryption then leave
everything at defaults. It will automatically detect the wireless network and join it.
If the network is encrypted then either use the set-up CD or go directly into the built in web
interface (IP address =192.168.2.225)
In order to connect to the device we can use the Set-up software, which is on the CD. The
idea is that it will find the connected device and show you the current settings.
Or just ignore the software and configure the unit manually through the web-based interface.
By default the IP address is set to Static (192.168.2.225), so check the IP address of the
computer attached to the Bridge.
All of the adapters
settings will be listed
here.