Neff U15E52N3GB - Manual (Page 9)

9
Operating the appliance
In this section, you can read about
■
how to switch your appliance on and off
■
how to select an operating mode and temperature
■
how you can change the basic settings
■
when your appliance switches off automatically
Switching on the appliance
1. Turn the operating mode selector until the desired operating
mode is selected.
A default temperature appears on the temperature display.
2. Turn the temperature selector to change the default
temperature.
Notes
■
You can only start the operating mode / Low-temperature
cooking if neither • nor œ are shown in the temperature
display.
■
If no default temperature is displayed, the temperature of your
selected operating mode is a fixed setting. You cannot
change this temperature.
Current temperature
Press the
± info button. The current temperature appears for
3 seconds.
Note: The current temperature can only be displayed with
operating modes with a default temperature.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (figure A)
■
Appliance reheating (figure B)
Switching off the appliance
Turn the operating mode selector to the Û position. The
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The basic settings for both ovens can be activated using the
operating controls on the õ bottom oven.
To change the basic settings,
■
the appliance must be switched off.
■
the childproof lock and timer function must be switched off
1. Press and hold the ± info button for 3 seconds to go to
the basic settings menu.
In the temperature display,
™‚‹ appears.
2. Press the ± info button briefly and repeatedly until the setting
symbol for the current basic setting of a submenu is
displayed in the temperature display (e.g. ™„ƒ ).
3. Using the temperature selector, set the required basic setting
within a submenu (e.g. ™„„ ).
4. Press and hold the ± info button for 3 seconds.
Your basic setting is saved.
You can change the following basic settings:
Operating mode Default temper-
ature in °C
Temperature
range in °C
3 CircoTherm® 160 40 - 200
% Top/bottom heat 170 50 - 275
0 CircoTherm intensive 220 50 - 275
4 Circo-roasting 170 50 - 250
+ Full-surface grill 220 50 - 275
Full-surface grill
(intensive)**
Fixed setting
( Centre-area grill 180 50 - 275
Centre-area grill
(intensive)**
Fixed setting
$ Bottom heat 200 50 - 225
/ Low-temperature
cooking
Fixed setting
“ CircoTherm® Eco 160 40 - 200
z Oven cleaning Fixed setting
^ Interior lighting Fixed setting
* Turn the temperature selector beyond 275 °C. ‚Ÿ£ appears
in the temperature display
Temperature dis-
play
Meaning
• Residual heat high (above 120 °C)
œ Residual heat low (between
60 °C and 120 °C)
Basic settings menu
Submenu
Basic setting Setting
symbol
Childproof lock Appliance controls
unlocked
™‚‹
Appliance controls locked ™‚‚
Appliance controls perma-
nent lock
™ƒ‚
Audible signal Audible signal off ™„‹
Audible signal 30 seconds ™„‚
Audible signal 2 minutes ™„ƒ
Audible signal 10 minutes ™„„
$ %