Belkin PLAY N600 User Manual
Page 7
7
GettiNG starteD
6 . a progress screen will appear while additional software is
installed . this may take a few minutes to complete . Once
finished, a “success” message will appear indicating that you
are connected to the internet via your new Belkin router .
During setup you may be asked for additional information.
You may need to enter a username and password provided
by your isP . this username and password is likely to be
found on materials that came from your isP when you
signed up for service . if necessary, you may need to contact
your isP to retrieve your username and password .
if you have a static iP address, you may need to enter
additional information also provided by your isP .
if your computer doesn’t have a wireless adapter, or the
setup software is unable to control it, you may be asked to
connect your computer to the router with a network cable .
if the setup software is unable to detect your Vci and VPi
settings based on your country, you may also need to enter
this information . Your isP is likely to have provided it .