Pausing, Cancelling, Note – Neff H53W50S3GB User Manual

Page 8: Memory, Saving memory settings, Example: 360 w, 25 minutes, Press the i button, Press the required microwave power setting, Set the cooking time using the rotary selector, Confirm by pressing the i button

Advertising
background image

8

Pausing
Press the "stop" button once, or open the appliance door. After

closing the door, press the "start" button again.

Cancelling
Press the "stop" button twice, or open the door and press the

"stop" button once.

Note: You can also adjust the cooking time first and then the

microwave power setting.

Memory

You can save the settings for a dish in the memory and call it

up again at any time.
The memory is useful for if you frequently prepare a specific

dish.

Saving memory settings

Example: 360 W, 25 minutes

1.

Press the

i

button.

"M" appears in the display.

2.

Press the required microwave power setting.
"M", the selected power setting and "1:00 min" appear in the

display.

3.

Set the cooking time using the rotary selector.

4.

Confirm by pressing the

i

button.

The clock reappears. The setting is saved.

Notes

You cannot save several microwave power settings one after

the other.

You cannot save automatic programmes.

You can save the memory settings and start the appliance

immediately. When finishing, instead of pressing

i

, press

"start".

Saving a new setting in the memory: press the

i

button.

The old settings appear. Save the new programme as

described in steps 1-4.

Starting the memory

It is very easy to start the saved programme. Place your meal

into the appliance. Close the appliance door.

1.

Press the

i

button.

The saved settings are displayed.

2.

Press the "start" button.

The cooking time counts down in the display.

The cooking time has elapsed
A signal sounds. Open the appliance door or press "stop". The

clock reappears.

Pausing
Press the "stop" button once, or open the appliance door. After

closing the door, press the "start" button again.

Cancelling
Press the "stop" button twice, or open the door and press the

"stop" button once.

Changing the signal duration

You will hear a signal when the appliance is switched off. You

can change the duration of the acoustic signal.
Press the "start" button for approx. 6 seconds.

The new signal duration is adopted.

The clock reappears.
The following are possible:

Short signal duration - 3 tones

Long signal duration - 30 tones.

Care and cleaning

With careful care and cleaning your microwave oven will retain

its looks and remain good order. We will explain here how you

should care for and clean your appliance correctly.

ã=

Risk of short circuit!

Never use high-pressure cleaners or steam cleaners to clean
the oven.

ã=

Risk of burns!

Never clean the appliance immediately after switching off. Let
the appliance cool down.

ã=

Risk of electric shock!

Do not immerse the appliance in water or clean under a jet of
water.
Surfaces are different, and damage caused by using the wrong

cleaning agent can be avoided by observing the information in

the table below.

Do not use

sharp or abrasive cleaning agents.

The surface could be damaged. If such a substance comes





VWRS









VWDUW

L

J

PLQ

NJ



Advertising
This manual is related to the following products: