Perations, Cleaning with attachments – Bissell 16W5 User Manual

Page 8

Advertising
background image

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

O

perations

8

Cleaning with Attachments

Your Deep Cleaner is equipped with a

hose and at least one attachment for

cleaning stairs, upholstery, and more.
1.
important! if using to clean upholstery,

check upholstery tags.
1a. check manufacturer’s tag before clean-

ing. “W” or “Ws” on the tag means you

can use your deep cleaner. if the tag is

coded with an “X” or an “s” (with a diag-

onal stripe through it), or says “dry clean

only”, do not proceed with any deep

cleaning machine. do not use on velvet or

silk. if manufacturer’s tag is missing or not

coded, check with your furniture dealer.

1b. check for colorfastness in an incon-

spicuous place.

1c. if possible, check upholstery stuffing.

colored stuffing may bleed through

fabric when wet.

1d. Plan activities to allow upholstery

time to dry.

1e. Vacuum area thoroughly.

2. follow the instructions on page 6 for

filling the tank.

3. set the Readytools dial to the “tools” setting.
4. attach the cleaning tool to the end of the hose.
5. Plug in and turn the power switch to the

on (i) position.

6. clean by pressing the trigger to spray

solution onto the area to be cleaned.

slowly move the tool back and forth over

the soiled surface. Release the trigger to

suction dirty water. continue to clean in

the area, working in small sections, until

dirt is removed.

Caution: Do Not Overwet.

7. When finished cleaning, remove and rinse

tool(s) in clean, running water.

8. it is recommended that you suction clean

water from a bowl to rinse out the hose.

9. lift end of hose and stretch out to ensure all

water is cleared from hose.

4.

9.

3.

Advertising