Behringer V-AMP2 - Manual (Page 11)

11
V-AMP 2

In modes L1, L2 and L3, the additional 3-band EQ is set with the BASS, MID and TREBLE
controls. As this EQ works globally, it has no effect on the settings of these three controls from
the preset programming.

If you plug in your headphones, the V-AMP 2 automatically selects S1 mode.
2.1 Selecting CONFIGURATION modes
Your V-AMP 2 left the factory set in Studio 1 (S1) mode. To change modes, you have to switch to
CONFIGURATION mode. To do this, press buttons B and D simultaneously. You can switch from one mode
to another by means of the arrow keys. To leave this mode, press TUNER.
2.2 Standard set-up with guitar, footswitch and external playback
For practising purposes set your V-AMP 2 up as shown in fig. 2.1, for example. You can of course also plug in
a drum computer instead of a playback source, such as a tape deck. For silent practising plug your headphones
into the PHONES jack. Use the FS112V footswitch supplied with the V-AMP 2 to switch from one bank to
another or to activate the tuner.
Fig. 2.1: Standard set-up

For this application please select CONFIGURATION mode S1!
The V-AMP 2 is of course also ideally suited for recording your guitar parts for posterity, either on tape or
digitally. The advantage of the V-AMP 2 in recording situations is obvious: it makes you ultra-flexible, because
you can simply take the virtual amp with you into the studio control room without having to take along any
speakers. This gives you complete control of the sound on your V-AMP 2 at all times. If you feel the sound on
the mixer needs to be changed, you can discuss it with the sound engineer at once and together you can set
the sound so that it is perfectly suited to the recording. In other words, no more hassle of trekking back and
forward between the recording and control rooms.
2. EXAMPLES OF USE/CONFIGURATIONS