BEA Hunter LO-LINX - Manual

NOTES: 1) BEA RECOMMENDS TO USE THE HUNTER SYNC BOARD TO SYNC 2 DOOR CONTROLS WITH A PAIR OF DOORS.
2) IF USING AN OPTIONAL INHIBIT SWITCH FOR THE SAFETY SIDE SUPERSCAN. ROUTE THE INHIBIT SWITCH N.C. CONTACT TO STALL 1 &/OR 2.
IF AFTER TROUBLESHOOTING A PROBLEM, A SATISFACTORY SOLUTION CANNOT BE ACHIEVED, PLEASE CALL B.E.A., INC.
FOR FURTHER ASSISTANCE DURING EASTERN STANDARD TIME AT 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS,
CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 / MID-WEST: 1-888-308-8843 / WEST COAST: 1-888-419-2564. DO NOT
LEAVE ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING WORKDAY TO CALL B.E.A., LEAVE THE
DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER SACRIFICE THE SAFE OPERATION OF THE
AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM
Pre-wired
switch
assembly
HOLD OPEN
OFF
AUTO
LO-LINX
SETUP PWR TO CTRL BEAM
TX RX
SWITCH
AUX SENSORS MTR STALL
ACTIVATION SUPERSCAN SAFETY SUPERSCAN
EAGLE 1
EAGLE 2
MOTOR
-
+
24 V
TRANSFORMER
RED
RED
BROWN
WHITE
BLUE
YELLOW
GREEN
ACTIVATION SUPERSCAN SAFETY SUPERSCAN
BODYGUARD
BODYGUARD 2
BLACK
RED
RED
BLACK
WHITE
BODYGUARD (Y) HARNESS
USED FOR DUAL-EGRESS
APPLICATIONS
SIZE: DRAWN BY:
TITLE: Hunter FA Control,LO-LINX
A
100 ENTERPRISE DRIVE
PITTSBURGH, PA 15275
PHONE: (412) 249-4100
FAX: (412) 249-4101
EMAIL: www.beasensors.com
REV BY: 80.0272.01
SCALE: DATE:
NONE 05/17/2007
PART NO:
SHEET
1 OF 1
JED TUC