Behringer UB1002FX - Manual (Page 8)

8
EURORACK UB1002FX/UB1202FX
2.5 Digital effects processor
Fig. 2.5: Effects section
100 FIRST-CLASS EFFECTS
The EURORACK UB1002FX/UB1202FX features a built-in digital
stereo effects processor. This effects processor offers a large
number of standard effects such as Hall, Chorus, Flanger, Delay
and various combination effects. Using the FX control, you can
feed signals into the effects processor. The integrated effects
module has the advantage of requiring no wiring. This way, the
danger of creating ground loops or uneven signal levels is
eliminated at the outset, completely simplifying the handling.
3. APPLICATIONS
3. APPLICATIONS
3.1 Recording studio
Fig. 3.1: The UB1002FX in a recording studio
SIGNAL and CLIP LED
The SIGNAL LED on the effects module shows the presence
of a signal whose level is high enough. This LED should always
be on. However, make sure that the CLIP LED lights up only
sporadically. If it is lit constantly, you are overdriving the effects
processor, which leads to unpleasant distortion. If this occurs,
turn the FX controls down somewhat.
PROGRAM
The PROGRAM control has two functions: by turning the
PROGRAM control, you dial the number of an effect. The number
of the preset you just dialed up blinks in the display. To confirm
your selection, press the PROGRAM control; the blinking stops.
FX TO MAIN
The FX TO MAIN control feeds the effects signal into the main
mix. If the control is turned all the way counterclockwise, no
effects signal is present in the sum signal of the mixing console.
The appendix contains an overview of all presets of the multi
effects processor.