Arkon TTGO121 - Manual

TTGO121 | Powered Lighter Socket Mount for TomTom GO GPS
Package Contents:
(1) CM097-2 - 12V / Lighter socket mount with power outlet
(1) APTTGO520 - Adapter plate for TomTom GO 520, 530, 720,
730, 920, 920T, and 930 models
Mount Installation Instructions
!
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists™
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan
© Copyright 2008 Arkon Resources, Inc.
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
Insert the DC Power plug (A) completely into the vehicle’s
12V / lighter socket.
Adjust the angle of the pedestal arm and rotatable dual
T head by tightening the wing nuts (B) to the desired
placement angle.
Step 1.
Step 2.
CM097-2
Lighter socket mount
A
B
12 V Powering
Outlet Socket
Step 1. Attach the device cradle to the pedestal by inserting
the dual T-Tabs of the pedestal (C) into the T-slots of
the adapter plate (D).
TomTom GO Device Attachment
C
D
APTTGO520 -
Adapter plate for
TomTom GO
Step 1. Attach the adapter plate by sliding it up into the slot on
the back of the TomTom GO 520, 530, 720, 730, 920, 920T,
or 930 device as shown below.
TomTom GO Adapter Plate Installation
Do not place mount in or near an air bag deployment zone
or where it will obstruct view of the road.
!
TomTom Device Compatibility:
- For use with TomTom GO - 520, 530, 720, 730, 920, 920T, and 930 models
TomTom, ONE, and GO are product names, trademarks, or registered
trademarks of TomTom International BV. Arkon Resources, Inc. is not
affi
liated with TomTom International BV.