Britax BOULEVARD CS - Manual (Page 18)

32 33
Harness Buckle
Fastening the Harness Buckle
Hold the harness buckle with one hand. 1
Use your other hand to insert one buckle 2
tongue at a time into the harness buckle
(Fig. A).
A proper connection is confirmed with an •
audible click after inserting each buckle
tongue.
Releasing the Harness Buckle
Brace the rear of the harness buckle with 1
one hand.
Use your thumb to press the release button
2
and slide both buckle tongues to remove
from the buckle (Fig. B).
IMPORTANT: Periodically clean the harness
buckle to ensure safe operation. See page 39.
a
b
How to Adjust Harness Height
IMPORTANT: See Important Harness
Adjustments on pages 6–7 for instructions on
proper harness fit based on your child’s height
and weight.
Loosen the harness by lifting the harness 1
adjuster lever while pulling the harness
straps forward as far as possible.
Rotate the head restraint adjustment knob
2
on either side of the child seat to raise or
lower the head restraint and harness (Fig. C).
NOTE: DO NOT force the head restraint adjustment knob in either
direction. If the knob is difficult to turn, the head restraint may be at
maximum or minimum height, the harness may be tight, or the child’s
weight is pressing against the head restraint cover.
c
Child Seat Functions Child Seat Functions