Brother FAX-727 - Manual (Page 79)

70 Chapter 12
Setting the Toll Saver
When you set the Toll Saver feature, the machine answers after 5 (4 in Australia and New Zealand)
rings if you don’t have messages, and after 3 (2 in Australia and New Zealand) rings if you do have
messages. This way, when you call the machine, if it rings 4 (3 in Australia and New Zealand) times,
you know you have no messages, and can hang up, avoiding any toll charge.
1
Press Menu/Set , 2 , 1 .
2
Press or to select TOLL SAVER, and press Menu/Set .
3
Press or to select ON (or OFF), and press Menu/Set .
4
Press Stop/Exit .
ICM Recording Monitor
This feature lets you turn OFF (or ON) the speaker volume for voice messages. When you turn the
monitor OFF, you will not hear messages as they come in.
1
Press Menu/Set , 8 , 5 .
2
Press or to select OFF (or ON), and press Menu/Set .
3
Press Stop/Exit .
Recording a Conversation
You can record a telephone conversation by pressing Play/Record during the conversation. Your
recording can be as long as the Incoming Message Maximum Time. The other party will hear a beep
every 15 seconds while recording. You cannot record a conversation using the Speakerphone.
Fax Forwarding/Paging
When Paging is set to ON, your machine dials the pager number you have programmed and, when
connected, plays the Paging OGM message you have recorded for 60 seconds. This activates your
pager and let you know you have a fax or voice message in the Message Centre memory.
When Fax Forwarding is set to ON, your machine dials the fax machine phone number you’ve
programmed, and forwards any faxes you’ve received.
When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be
off for the machine to operate using your Ring Delay setting. (See Setting the Ring
Delay, page 24.)
You cannot use Paging and Fax Forwarding at the same time.