Media control server (mcs) settings, Network, Select network – Beaumont Products MPEG - 4 User Manual
Page 14: Select default nameserver from the left menu, Enter apply, Select default nameserver from the left menu e, Enter apply f
V B R I C K E T H E R N E T V S E T T O P B O X U S E R S G U I D E
V E R S I O N 3 . 6 . 9
Media Control Server (MCS) Settings
The EtherneTV Set Top Box comes configured for Local Mode. The administrator should
make the following changes if the configuration
involves an MCS.
2
1
Network
Select Network c and the enter key.
Select Network
Select Network again from the left menu d.
Select Default Nameserver from the left
menu e.
Enter the Default Nameserver IP address(es) f.
5
4
3
NOTE: Only necessary if Network: Ethernet,
DNS via DHCP box is not checked or a static
IP is configured.
Enter Apply f.
After making the required entries, select Apply to
apply the changes. Changes are not active until
they are applied.
C O P Y R I G H T V B R I C K S Y S T E M S
P A G E 1 4
N O V E M B E R 1 0 , 2 0 0 3