BT Freestyle 350 User Manual

Page 8

Advertising
background image

8

Getting started

BT Freestyle 350 – Issue 2 – Edition 01 – 08.01.07 – 7971

If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]

2. Batteries will come inserted in the battery compartment.

Pull the plastic tag as instructed to activate the batteries.

3. Place the handset on the base to charge for at least 16 hours.

When the handset is fully charged, the battery icon on the
display shows .

4. After 16 hours charging, plug one end of the telephone line

cord into the socket on the underside of the base and the
other end into the telephone wall socket.

IMPORTANT
When you connect to the telephone line, please note that your
BT Freestyle 350 answering machine will be set to On.

To set the date and time, please see page 47.

Your BT Freestyle 350 is ready to use.

Battery low warning

If the symbol flashes in the display

and you hear a warning beep every few

seconds, you will need to recharge the

handset before you can use it again.
During charging, the icon will scroll

in the display.

Talk/Standby time

In ideal conditions, fully charged

handset batteries should give up to

10 hours talk time or up to 100 hours

standby time on a single charge. The

base must remain plugged in to the

mains and switched on at all times.
Note that new batteries do not reach

full capacity until they have been in

normal use for several days.

Battery performance

To keep your batteries in the best

condition, leave the handset off the

base for a few hours at a time.

Running the batteries right down at

least once a week will help them last as

long as possible.
After charging your handset for the

first time, subsequent charging time is

about 6–8 hours a day.
Batteries and handset may become

warm during charging. This is normal.

Telephone line cord

Advertising