Baby Trend 9134 User Manual

Page 3

Advertising
background image

ASSEMBLY:

Remove stroller from box. The front wheel, rear wheels, fender, child tray

and parent tray need to be installed prior to use.

To attach the front wheel, unfold stroller as described in the section

following. See figure 1.

Lean the stroller backwards so that it rests on the handle and rear axle frame

and the front wheel forks are pointing upward.

The front wheel features a quick release attachment system. See figure 3.

Slide the front wheel onto the front forks. See figure 2. The quick release

must be loose enough for the wheel to slide on and the brake release lever

must be in the open position (see figure 6). Line up the tab on the Holding

Plate with the slot on the fork plate. With the wheel in position, tighten the

finger nut on the axle until it is very close to contacting the fork. See figure

4. Rotate the lever to the closed position as shown in figure 5. You should

feel significant resistance when closing the lever and the wheel should be

held tightly. If you do not, open the lever and tighten the finger nut a bit

more and close the lever again. Continue to do this until the wheel is held

tightly in the fork. Close the brake release lever by rotating it toward the

front of the stroller. See figure 6.

• The front fender is secured to the frame by the 5 screws provided. Examine

the bottom of the front fender. You will notice four

1

/

4

inch diameter plastic

tubes protruding from the bottom. See figure 7a. These tubes must be lined

up with the holes in the front frame assembly. See figure 7b. Line up the

front fender and press onto the front frame assembly. See figure 7c. Insert

the 5 screws through the underside of the front frame assembly into the front

fender's plastic tubes. Tighten the screws only until snug. See figure 7d.

Do Not over-tighten.

TO ENSURE SAFE OPERATION OF YOUR STROLLER, PLEASE FOLLOW THESE

INSTRUCTIONS CAREFULLY. RETAIN THESE INSTRUCTIONS FOR FUTURE

REFERENCE.

Ring

Figure 1.

Figure 2.

Figure 3.

3

Front Wheel

Rear Wheels

Stroller

Fender Screws

Parent Tray

Fender

Child Tray

Advertising
This manual is related to the following products: