Bissell 5770 - Manual (Page 8)

1 Make sure the cleaner is in the upright
position.
2. Remove the hose wand from the wand
base. This automatically diverts the
suction to the hose. Unwind the hose from
the cleaner.
Note: To help prevent the machine from
tipping, the hose should remain in the
bottom hose clip.
3. Use the hose and wand alone or attach
any of the tools to the end of the hose
wand.
TurboBrush
Use rotating brush action for small areas such
as stairs and upholstery.
Note: Press gently when using the
TurboBrush to gain maximum cleaning.
Too much pressure could cause the brush
to stop rotating.
Combination brush
Use longer soft bristles for dusting.
Remove long bristle portion and use shorter stiff
bristles when agitation is needed to remove debris.
Crevice tool
Use in tight narrow spaces
Telescoping extension wand
Use with desired attachment for a longer reach. To
extend the wand, twist the collar to “Unlock” and
push away from you. Twist the collar to “Lock”
to lock into place. To retract, twist to unlock, pull
toward you and twist to relock.
All items may not be included with your model.
Other tools are available; to order, please refer to
page 18-19.
8
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
U
sing the tools
ATTENTION:
Always place the vacuum
cleaner on the floor in its fully
upright position when using
tools. Placing the vacuum in
this position automatically
stops the rotating brush.
2
CAUTION:
To avoid personal injury
and to prevent the cleaner
from falling when cleaning
stairs, always place it at
the bottom of the stairs.
ug203-1369_5770_706.indd 8 ug203-1369_5770_706.indd 8 7/25/06 12:43:11 PM 7/25/06 12:43:11 PM