Blaupunkt GTA 250 - Manual (Page 8)

8
GTA 250
Fit the amplifier in a suitable location, e.g.
beneath the seats or in the trunk (Fig. 1).
The mounting location must also be dry, and
provide sufficient ventilation for cooling of the
amplifier. Use cable grommets when pass-
ing cables through holes with sharp edges.
Use loudspeakers with an impedance of
2 to 4
Ω (see table or installation drawing).
Observe the max. power handling specifi-
cations (music output). Do not connect the
loudspeakers to ground; only use the termi-
nals provided. The cross-section of the pos-
itive and negative cable must be at least
6 mm
2 .
GTA 250 amplifier
The amplifier is suitable for connection to car
radios with Cinch connector. Use the Blau-
punkt ISO Cinch adapter to connect the
amplifier to car radios with ISO connec-
tor (7 607 893 093/ 7 607 855 094).
Applications and loudspeaker
connection
Stereo-Mode
Max Power
2 x 100 Watt / 4 Ω Fig. 4, 4a
Mono-Mode
Max Power
1 x 400 Watt / 4 Ω Fig. 5
Stereo-Mode
Max Power
2 x 160 Watt / 2 Ω Fig. 4, 4a
Stereo-Mode
RMS Power
2 x 50 Watt / 4 Ω Fig. 4, 4a
Mono-Mode
RMS Power
1 x 160 Watt / 4 Ω Fig. 5
Stereo-Mode
RMS Power
2 x 80 Watt / 2 Ω Fig. 4, 4a
Frequency
response
10 Hz - 30.000 Hz
Signal-to-noise
ratio
> 90 dB
Stability 2 Ω
Input-sensitivity 0,1 - 8 V
Low-pass filter 40 - 450 Hz
High-pass filter 65 - 450 Hz
Bass Boost 0-18 dB
Dimensions
W x H x D (mm)
242 x 49,5 x 232