Billy Goat BC2402 User Manual
Page 17
Part No 500264
17
F083106A
BC2402 Series Brush Cutter Owner’s Manual
B
LADE
R
EMOVAL AND
S
HARPENING
READ all safety instructions before servicing unit.
Numbers in parenthesis ( N-N ) refer to figure and item numbers in Illustrated Parts List.
Tools required:
- 5/8” socket, 1/2” drive
- torque wrench, 1/2” drive
- jack stands or similar device adequate to support weight of machine.
DISCONNECT spark plug wire before servicing unit.
1. Disconnect spark plug wire.
2. Lift and support front of unit to allow access to underside.
UNIT IS HEAVY. Make sure support is adequate to support weight of machine.
3. Block blade to prevent it from rotating during removal.
4. Remove blade bolt (8-139), lock washer (8-140) and friction washer (8-54).
Blade bolt (8-139) is a standard right-hand thread bolt.
5. Remove blade (8-50) and install replacement blade.
When replacing the blade use BILLY GOAT Industries PN 500210 only.
6. Attach new blade with bolt (8-139), lock washer (8-140) and friction washer (8-54 removed earlier.
Inspect fasteners for wear and replace if necessary.
7. Torque blade bolt to 60 ft-lbs.
8. Reconnect spark plug wire.
When sharpening blade make sure to sharpen all cutting edges.